The Effect of Bio-Fuel Blends and Fuel Injection Pressure on Diesel Engine Emission for Sustainable Environment

Abstract

Problem statement: Diesel engine emits more pollutants to atmosphere causing air pollution. This necessitates the search of a renewable alternate fuel which is environment friendly. The objective of this research was to investigate the environmental aspects of pongamia bio-fuel in a single cylinder diesel engine with the influence of fuel injection pressure. Approach: Bio-fuel was prepared from non-edible Pongamia pinnata oil by transesterification and used as a fuel in C.I engine. The effect of fuel injection pressure on the engine emission characteristics of a single cylinder direct injection diesel engine has been experimentally investigated using pongamia pinnata methyl ester and its blends with diesel fuel from 0-30% with an increment of 5% at full load. The tests were conducted at five different injection pressures (190, 200, 210, 220 and 230 KN m^-2) by means of adjusting injector spring tension. Results: Compared to diesel, blend B5 exhibits lower engine emissions of unburnt hydrocarbon, carbon monoxide, oxides of nitrogen and carbon di oxide at full load. The High injection pressure of 220 KN m^-2 shows lesser emissions of unburnt hydrocarbon and carbon monoxide while oxides of nitrogen and carbon dioxide are found to be slightly higher than diesel and blends at full load. Conclusion: From the test results, it was found that a high injection pressure of 220 KN m^-2 causes better atomization with improved engine emission characteristics for diesel and blends at full load. Moreover blend B5 showed best results at 220 KN m^-2 injection pressure.